Category Archives: Belkin Router


Steps to fix BELKIN ROUTER ERROR 651

How we define the term Error 651?

Error 651 is one of the most common windows errors which normally occurs when a user is trying to establish an internet connection by using PPPoE connections.

Topmost reasons why this error occurs?

  • Raspppoe.sys file might have been saved in the wrong location.
  • Instant Registry errors.
  • IP address conflict issues.

Steps to easily fix connection failed with the error 651 in Windows by our expert BELKIN ROUTER SUPPORT technicians

  • Reconnect the Router or a user can use other connecting devices
  • Resetting of the TCP/IP on the PC is required
  • Recreation of the dial up connection carefully:
  1. Open the Network & Sharing Center option and tap on the Change Adapter Setting.
  2. Now simply right click on the broadband or just use the dial up connection and select the Create Copy option.
  3. This will develop a copy of an existing connection.
  4. Now just delete the old connection and then redial the new one.
  • Next, a user is required to disable the Auto Tuning Feature
  • Then, simply disable IPv6 of the Internet Connection:
  1. Access the Control Panel and then select Network & Internet.
  2. Next, choose the Network & Sharing Center option.
  3. Now, just click on the active network connection displayed on the screen.
  4. Select the Properties and then switch to Networking
  5. Un-tick or just uncheck the Internet Protocol version 6 (TCP/IPv6) and then click on Ok.
  • Reinstallation of the Network Adapter  is essential
  • Perform the Clean Boot process
  • Hopefully, all the above mentioned solutions will help users in solving error 651

Why you should call us?

We are engrossed with in-depth qualified belkin router customer support team of technicians who have deep skills and expertise of solving all types of relevant issues related to Belkin router anytime anywhere. Being adept in resolving every minute issue related to Belkin router, we are chosen as one of the most renowned Belkin customer support services by delivering them a cost-effective solution to their router technical snags. Your issues are our headaches and we do promise to deliver our customers a feasible solution to their problems.  Come and explore our Belkin toll-free number at highly reasonable charges with the best-in-class results in the market. Dial us at our Belkin contact  for immediate assistance to your queries.




This blog is written by the professional BELKIN ROUTER TECHNICAL SUPPORT NUMBER professionals who will teach you about various steps on how to connect two routers together. By connecting two routers together, users can easily connect multiple computers or devices via wifi or Ethernet, and expand the wireless network coverage.

  • Determine which type of router will be chosen as a main router.
  • Determine the type of router which you want to choose as a secondary router.
  • Place both the routers just near the PC device.
  • Choose between a LAN-to-LAN or LAN-to-WAN connection which you wish to go ahead with
  • Connect the main router to the modem and then connect the computer device to the router with the help of Ethernet.
  • Connecting the computer directly to the secondary router is required to smoothly complete the step.
  • If you find that the router has an option UPnP which has been disabled on the second router.
  • Configure the DHCP server carefully on the secondary router
  • Change the wireless channel which is essential for users to complete the process.
  • Place the routers.
  • Connect both the routers carefully.

Why uses should approach us?

Our Router support service is available for different group of customers using different kind of routers worldwide. We work 24 hours to meet their daily demands for various workings issues faced by them. We believe in customer satisfaction and have the best track record of the highest success rate to identify customer’s problem and solve them instantly with successful results. If you are looking to contact BELKIN ROUTER CUSTOMER SUPPORT and searching for online assistance to resolve your problems, you can call us on our toll-free number and we will get back to you via online tech support service with the best customer care support solution at very reasonable charges.


How to Connect a Belkin Router

3 Ways to Connect a Belkin Router


Belkin router to authorize all the devices and computers in your home to divide high-speed Internet connection therefore you can play games, check email, browse the Web, and much more. You can easily setup Belkin router by using the manual configuration procedure or by using the Belkin router driver disk. To Install Belkin Wireless Router contact our Belkin support team.

Three important methods to connect a Belkin Router as described by the Belkin router support team

Method 1: By Using Manual Configuration

  • Connect the Belkin router to the modem with an Ethernet cable.
  • Use another Ethernet cable to connect Belkin router directly to your computer.
  • Start the Internet browser on your PC and input “” into the address bar of the web browser.
  • Now click on “Login” at the top right corner in the Web page.
  • Do not input anything in the “password” field and click on the “Submit.”
  • Input the network details provided by your Internet Service Provider, then click on “Apply Changes.”

Method 2: By Using the Belkin Setup Disk

  • Connect the Belkin router to the modem by using an Ethernet cable.
  • Insert the Belkin router driver disk in the DVD drive on your PC.
  • Click on the “Run the Easy Install Wizard,” and perform the on-screen instructions to configure your internet connection.

Method 3: Fixing Belkin Router Setup Issues

  • Keep your Belkin router away from hindrances and gadgets that may be creating interference such as metal cabinets, cordless phones, aquariums, refrigerators, and microwave ovens that can disturb your router Wi-Fi signals.
  • Inspect the Ethernet cables for your Belkin router and modem if you are not able to create a connection between your PC and the router.
  • Push and hold the reset button for minimum fifteen seconds on your Belkin router if you are not able to log directly into the router.

Why Call Us?

Belkin router issues can arise at any time and so it is necessary to take a professional advice from Belkin router customer support professionals, available online 24 hours a day with instant service. Customers facing numerous issues with Belkin routers can get in touch with our skilled technicians who bring world class router solutions at your home with the best-industry results at highly reasonable rates.  So, pick up your phone and call our Belkin Router Technical Support  toll-free number +1-888-231-0380.


How to Change Wi-Fi Password?

Step to Change Wi-Fi Password

A secure Wi-Fi network offers the convenience to connect wirelessly anywhere in your office or home or public places such as airports, restaurants, coffee shops, malls, shopping complexes etc. but if someone can steal your Wi-Fi password then it is a serious threat for your network security. If you want to Change Belkin Router Password then contact us immediately.

Therefore it is essential for you to create a strong password and change your password at regular intervals to avoid any kind of misuse of your Wi-Fi network connection.

Follow the simple instructions below offered by the Belkin Support to change the Wi-Fi password of your Belkin Router.


  • Open the configuration page of your Belkin router.
  • Then input the username and password of router.
  • Launch the Wireless section. When you are logged into your router, you will require searching the Wireless section in the configuration page.
  • If the “Wireless” section has various subsections, launch the Wireless Security page.
  • Then modify the password. Search for the box named “Passphrase”, “Shared Key” or “Password”. You can input the new password in this box.
  • Create a strong password with numbers, special characters and alphabets which are unable to guess.
  • Then inspect your security kind. There are 3 kinds of wireless encryption: WPA, WPA2, and WEP. For the highly safe wireless network, you need to use WPA2 encryption.
  • Now modify the name of your Wi-Fi network.
  • The next step is to save the settings. When you are done then you need to input your new password, and click on “Save” or “Apply” button.
  • After your settings are modified, you can connect to your wireless network using your new password.

Why to Approach Us?


Call our toll-free number +1-888-231-0380 any time, round the clock for quick online assistance for all the technical issues related to the Belkin Routers. If you are looking to contact Belkin Technical Support to resolve your problem, please get in touch with our certified technicians to get the best customer support service at highly reasonable charges. Our customer-driven innovation leads to solutions and services that address real world requirements.



Steps to Maximize the Speed of Your Internet Connection

How to Maximize the Speed of Your Internet Connection

The speed of your internet connection depends on various factors such as hardware, speed of the network, latest firmware, and proper optimization of network and computer etc. You can try to improve the internet speed of your internet connection. To get instant technical support for Setup Belkin Router, get in touch with us.

Part 1: Inspecting Your Network, Connection and Hardware

  • Try to perform a speed test check on your computer to check maximum speed you are receiving from your ISP for uploading or downloading files.
  • You need to restart your modem and router which let you help fixing some type of network issues.
  • Also don’t forget to download the latest firmware update for your router.

Part 2: Enhancing Your Network and Computer

  • Perform virus scans on your computer every week.
  • Also regularly optimize the cache of your internet browser.

Part 3: Hardware Upgrade

  • Upgrade the hardware of your PC.
  • If your PC speed is very slow, then it will also affect the internet speed in your computer. Therefore to enhance the performance of your internet browser you need to upgrade RAM in your PC.
  • Instead of using Wi-Fi, always try to use the Ethernet connection for surfing the internet. This will results in enhanced speeds for your devices, as well as reduced interference for your rest of the wireless devices like smartphones and tablets.

Why You Should Call Us?

Dial our toll-free number +1-888-231-0380 any time, round the clock to get quick online remote assistance for all the technical problems related to the Belkin Routers. If you are looking to contact Setup Belkin Technical Support Number to resolve your problem, please get in touch with our Belkin Router support team to get the best customer support service at highly reasonable prices.


How To Fix Belkin Code 10 Error Message?

Belkin Router error Code 10 error is one of several Device Manager error codes which is faced users on frequent basis. According to Belkin router technical support experts, this error code 10 will be displayed in the following way:

Recommended- How to fix BELKIN ROUTER ERROR 651?

“This device cannot start. (Code 10)”

Such details on Device Manager error codes like Code 10 are easily available in the Device Status area right in the device’s properties

Cause of the Code 10 Error

  • A Code 10 error is generated while Device Manager is unable to start the hardware device properly, where according to the Belkin customer support professionals, it’s a situation which is usually caused by outdated or even corrupted drivers.
  • A device may receive a Code 10 error if it’s the case where a driver has generated an error which the Device Manager doesn’t understand at all. In other words, you can say that it’s a Code 10 error which can often be a very generic message indicating a kind of unspecified driver or weird hardware issues.

Steps to Fix a Belkin Code 10 Error

  • Restart the PC device computer if you haven’t done yet
  • Go for a check whether you have installed a device or have made any particular changes in the Device Manager just before the Code 10 error has appeared? If so, it’s quite likely that the changes you made have caused the Code 10 error.
  • Re-installation of the drivers for the device is another essential step to be considered by users. Uninstalling and then reinstalling those device drivers is a likely solution to a Code 10 error of Belkin router.
  • Update the device drivers instantly. It’s also likely the cause where  installation of the latest drivers for the device could easily correct the Code 10 error, even if these drivers were previously functional properly
  • Deletion of the Upper Filters and Lower Filters values in the registry section is an essential task. Two particular values in the Windows Registry may come as a corrupted, causing the Belkin Code 10 error.
  • A user is requested to try for an older driver version, or previous Windows versions.
  • Purchasing a powered USB hub will do the good if the Code 10 error is showing up for a USB device.
  • Replace the hardware later on

Fix your issues with our Belkin professionals


We as a Belkin router customer support team resolves every minute issue faced by users at completely lowest cost. Well, the best router support service provider always plays vital role in solving customers’ problem related to Belkin router as and when required with deep technical expertise. Our services are delivered to users all day long 365 days in a year. We promise to deliver users a complete Belkin support solutions instantly.


A Manual Guide To Easily Configure Belkin Router To Use DHCP

Belkin Router support professionals Help to A Manual Guide To Easily Configure Belkin Router To Use DHCP . DHCP is a type of protocol which is heavily used to assign IP addresses in an automatic mode over LAN networks. In static method, there will be a network admin or system admin or even a user that are manually assigned IP address on the device. But yes if the number of devices are much more and users don’t wish to take the headache for assigning the IP addresses, then according to it Configure Belkin router support professionals, it becomes so damn time consuming to manually assign IP address to each of the  device. To easily configure a router of this type, then the support of dynamic IP address is needed.

How to configure a router to use DHCP 

Step 1: Configure IP Address

First users are supposed to configure the IP address on the Router Fast Ethernet Port section

Step2: Router configuration

  • Configuration of the router to be able to work with DHCP Server is an important step
  • This step further involves two categorized steps that are essential for users to be carried out. The first one is to have a proper creation of a DHCP address pool which can be done by belkin router. The second one is to assign a network subnet directly to the created pool. This network assignment will be completed in two different ways. The first method is a network and subnet mask form. The second method is preceded with a CIDR form.

These are few ways to describe the subnet.

Step 3: Assigning of a gateway to the subnet

Every subnet has its own kind of gateway. It does not really matters what the gateway IP address is given. People will usually give the first IP address in the subnet section as a gateway. Let’s say for example: the IP as the gateway for the created subnet in DHCP as a gateway.



Cloning Computer’s MAC address to your Belkin Router

Belkin Router Before knowing about the cloning process of the Mac address to Belkin router, it is essential for all users to know the full form of MAC address. It originally stands for Media Access Control address. Belkin router support experts define this as a unique identifier to be assigned to each and every device while they are in the manufacturing process so that they can easily be identified while working on a network. This is a type of unique number which is generally assigned once, but can’t be changed at all. Some ISPs work with this MAC address to easily identify various devices to assign the internet connection for the device. In this case, only the specific device with that MAC address will be able to access the internet connection and the router will not be able to properly connect to the internet connection and share the internet among other devices.

Steps to clone computer’s MAC address to the Belkin router

This problem can easily be resolved by directly cloning the MAC address of the computer to the Belkin router which is entirely safe and easy to configure.

Step1: Connecting your PC 

  • Connect the computer to the router with the help of Ethernet cable whose MAC address you wish to clone to your available router.

Step2:  Working with the default IP address

  • Open a web browser and just enter the IP address of the router as guided by Belkin router technical support Default IP address of the router will be automatically be fetched

Step3: Login button  

  • Users are supposed to click on the “Login” button thereafter. Enter the password of the router to easily proceed for the following steps.
  • Leave the Password field blank to get access to the default password only.

 Step4: MAC Address Cloning option

  • On the left side panel, you are supposed to click on the “MAC Address Cloning” option.
  • Click on the “Clone “button and the router will do rest of the work itself. It will further automatically detect the MAC address of the PC and will assign this particular MAC address to itself.

Step5: Apply Changes

  • Click on the “Apply Changes” button to save all the settings.
  • Log out immediately thereafter from the router and power cycle the router as well as modem by turning them off.
  • At last, you are required to unplug both modem and router for at-least 20 seconds and then turn it back on again.
  • Restart the PC as usual.



Steps To Upgrade the Downloaded Belkin Router Firmware

Steps To Upgrade the Downloaded Belkin Router Firmware

Belkin router is one of the most well known routers which is downloaded by thousands of people worldwide but, the work does not stops here. One needs to properly upgrade the firmware on daily basis to keep it updated and properly working. This blog is based on the steps to upgrade the Belkin router which is described by professional Belkin Router Support members. Let’s not waste the time and go ahead. According to the expert professionals, the firmware can be easily be upgraded via a web-based setup page.


Steps to upgrade the Belkin router Firmware

Step 1: Web-based setup

  • Access the web-based setup page by simply opening any of the web browsers which you are using.  On the address bar, simply enter the router’s local IP address.
  • The Belkin router’s default IP address will be in default mode as studied by Belkin Router Technical Support team of experts. If this doesn’t work at all, then do perform a check for the router’s IP address.

Step 2: Login details

  • Click on the “Login” button which is located just at the top-right corner of the page.

Step 3: Managing the password

  • Enter the router’s “Password if you already have one with you.  Otherwise, a user is supposed to leave the field blank and then tap on the “Submit” button.

Step 4: Working with the “utilities” section

  • On the “Utilities” section which is located right in the left navigation panel, you simply need to click on the “Firmware Update” option.

Step 5: Browsing mode

  • Click on the “Browsing mode” option and then search for the file which you saved previously.

Step 6: Click on the open button

  • Selection of the firmware file is to be made and then click on the “Open” button. The firmware version is just an example which you need to follow.
  • The file name may vary depending on user’s router’s model as well as version number.

Step 7: Update option

  • Click on the “Update” option.

Step 8: Upgrade option

  • You will be prompted to continue with the upgrade process next and then click on the “OKbutton.
  • A prompt which will advise you not to turn off or reboot the router at the end of the upgrade will just appear on the screen while you are working with the method.  Click on the “OKmethod.
  • The firmware will then update the status and will simply appear on the screen

Step 9: Wait for a while

  • Once you have updated the process, you simply will be prompted to wait for several other seconds.

Step 10: Rebooting phase

  • Click on the “OK” button just after the router has completed its rebooting process.